Find Viking Repair Pro Near You
Viking dishwasher repair costs $150 to $600 in 2026, with most jobs near $250. A door latch or inlet valve runs $80 to $200, a drain pump $100 to $400, and a control board $200 to $600. High-end brands sit at the upper end because parts are model-specific and harder to source.
A Viking dishwasher is built like a luxury appliance, but it still works like a dishwasher, so the repair math follows the appliance, not the badge. This guide lays out real cost ranges by part, what pushes a Viking job higher than a mid-market unit, and the point where replacing makes more sense. Viking Repair Pro services Viking dishwashers across 8 markets in California, Colorado, Nevada, Arizona, and Oregon. For the cost picture on every appliance, see our Viking appliance repair cost guide, or book straight through Viking dishwasher repair service.
Viking dishwasher repair cost by part
The part that failed sets most of your bill. Filters, latches and inlet valves are quick swaps, while the pump, motor or control board carry pricier parts and longer labor. The ranges below are national benchmarks for common dishwasher repairs.
| Repair | Typical cost range |
| Door latch or door seal | $80–$200 |
| Water inlet valve | $80–$170 |
| Drain pump | $100–$400 |
| Heating element | $200–$350 |
| Control board / control panel | $200–$600 |
| Circulation motor | $350–$500 |
Most dishwasher repairs run $100 to $300, with an average near $200, according to HomeAdvisor. A control board, the part that manages cycles and run times, is the most common big-ticket fix at $200 to $600 installed, per HomeGuide.
Why a Viking dishwasher costs more to repair
Viking dishwasher repairs sit at the high end of the range because the parts are brand-specific and less universal than mid-market models. A generic dishwasher pump might cost $40, while the matched Viking assembly and the labor to fit it push the same job past $300.
Built-in panel-ready models add time too. The technician works around custom cabinet fronts and tighter integration, so access alone can add an hour. Higher-end brands can reach $750 or more for major repairs, HomeAdvisor notes, which is why a written quote after diagnosis matters before any part is ordered.
What a service call adds to the total
Two line items show up before any part: labor and the service fee. Dishwasher repair labor runs $50 to $125 per hour, with a service or diagnostic fee of $70 to $150 that many shops credit toward the repair if you book the work.
Where you live moves the number as well, since local labor rates vary across our service area. A clogged filter or stuck spray arm may be a single short visit, while a motor swap means pulling the unit out and usually runs longer than an hour.
Repair or replace a Viking dishwasher
Replace a Viking dishwasher when the repair tops half the cost of a comparable new unit and the machine is near the end of its life. Dishwashers last 8 to 12 years on average, so a 10-year-old unit needing a $500 board is a strong replace candidate, while a 3-year-old Viking with a bad pump is a clear repair.
This is the one place Viking pricing does not get luxury treatment. A dishwasher is a regular-tier appliance, so the standard 50% rule applies the same as any brand. For the full decision framework across appliances, see when to repair or replace a Viking appliance, and compare against our Viking refrigerator repair costs if more than one appliance is acting up.
Frequently asked questions
How much does it cost to fix a Viking dishwasher that won’t drain?
A Viking dishwasher that won’t drain usually costs $100 to $400 to fix, depending on the cause. A clogged filter or drain hose is the low end, while a failed drain pump sits at the top. Many drain problems are a one-visit fix once the technician confirms whether the blockage or the pump is the issue.
Is it worth repairing a Viking dishwasher?
Repairing a Viking dishwasher is worth it when the unit is under 8 years old and the repair costs less than half a replacement. New dishwashers run $600 to $1,700, so a $250 pump or valve repair on a newer Viking is the economical choice. Age and repair size decide it, not the brand.
How much is a dishwasher diagnostic fee?
A dishwasher diagnostic fee typically runs $70 to $150. This covers the visit and the fault diagnosis, and many companies apply it toward the repair if you approve the work. Viking Repair Pro gives a written quote after diagnosis, so you see the full price before parts are ordered.
Get a written Viking dishwasher quote
Viking dishwasher repairs span a $150 latch to a $600 control board, so a hands-on diagnosis is the only way to know your real number. Because the part determines so much of the cost, a written quote before work starts protects you from surprises. Schedule a Viking dishwasher diagnostic with Viking Repair Pro and find out exactly where your repair lands.
